Application – Single or double-acting cylinders. When used with single-acting cylinders, one port should be plugged.

Actuation – Air Operated.

Functions – Oil is directed to "extend" side of cylinder, oil from "retract" side goes to reservoir; cylinder "holds" with pump shut off. Oil is directed "retract" side of cylinder: oil from "extend" side goes to reservoir.

Note: Cylinder will not "hold" in the "return" position with motor running or shut off.  

Used on these pumps – PA17, PA56 an dPA55 Series..

10,000 PSI., 3/8" PORTS, 5 GPM MAX FLOW RATE.

NOTE: Valve is shipped without controls. 9594 can be used with the Remote Hand Control l (No. 209593).

CAUTION: To prevent sudden, uncontrolled descent of a load as it is being lowered, use a Load Lowering Valve (No. 9596) or Counter Balance Valve (No. 9720) in conjunction with the directional valve used in your application.

IMPORTANT: Conversion kit 251528 must be used when mounting any of the valves on PA17 or PE17 pumps.