HFS: 5 - 10T Pipe Flange Spreader | Power Team

ENGLISH

HFS: 5 - 10T Pipe Flange Spreader

Image 1of 2

PRODUCT TYPE:

No need to resort to "hammer and chisel" methods that wastes time and effort.

Find a location near you:

You’ll never again have to resort to “hammer and chisel” methods that waste time and effort. Flange spreaders should be used in pairs to provide even spreading force.
Standard 60° wedge is suitable for most flanges; 30° “thin” and 60° “blunt” wedges are optional.
The HFS3A is designed for applications where total thickness of flanges and max. spread gap is 3" or less and flange bolts are a min. of 11/16" dia.
Use HFS6A if total thickness of flanges and max. spread gap is 6" or less, and flange bolts are a min. of 13/16" dia.

Order No.	Capacity (tons)	Standard Wedge Type	Weight (lbs.)
HFS3A	5	60° Sharp	9
HFS6A	10	60° Sharp	18

Order No.	Optional Wedges		Min. Flange Opening			Min Combined Flange Opening	Pin Dia. (in.)
Order No.	30'' Thin	60'' Blunt	60° sth.	60° Blunt	30°	Min Combined Flange Opening	Pin Dia. (in.)
HFS3A	350823	350822	1/16''	1''	1/16''	3 1/2''	11/16''
HFS6A	350549	350550	1/16''	1 1/2''	1/16''	6 9/16''	13/16''

Go to Accessories section for product detail:

Accessories:Hydraulic Hoses