Power Team - A Major Force in High Force Tools
print

power team / products and services / accessories / hydraulic oil

Hydraulic Oil

  • 671x386_HydOil

Previous imageEnlargeCloseNext image
Image 1of 1
  • Hydraulic Oil
PRODUCT TYPE:

Fluids

Use for dependable performance of all of your hydraulic pumps and cylinders.
 
Find a location near you:
SEARCH
Standard Hydraulic Oil
  • For dependable performance of all your hydraulic pumps and cylinders.
  • Contains foam suppressant additives and has a high viscosity index.

Flame-Out® 220 fire resistant hydraulic fluid*
  • Contains anti-rust, anti-foam and antisludge additives.
  • Provides fire resistant protection. (Note: Will burn if heat source is extreme enough. Will not, however, propagate the flame and is self-extinguishing when there is no ignition source.)
  • Provides maximum lubrication and heat transfer.
  • Offers a wider operating temperature range.
  • No need to change seals in your Power Team equipment. Just drain the standard oil and replace it with Flame-Out® 220.

Biodegradable Hydraulic Fluid
  • Biodegradable, non-toxic fluid withstands moderate to severe operating conditions; provides excellent protection against rust.
  • Offers superior anti-wear properties, has excellent multi-metal compatibility.
  • Developed to meet stringent performance requirements and satisfy growing environmental needs for hydraulic fluids which are readily biodegradable and non-toxic. Can be used with all Power Team pumps, cylinders, valves and other accessories using standard seals. Depending on the contamination or degradation levels which might be present in used fluid, small amounts of this substance, if spilled, will not affect ground water or the environment. Acceptable methods of disposal include use as a fuel supplement. Since this fluid will not typically be hazardous waste, additional disposal options may be available, including land farming or processing through sewage treatment facilities, if necessary approvals are obtained from appropriate regulatory authorities. This fluid has been tested against EPA 560/6-82-003 and OECD 301 for biodegradability, and toxicity has been tested against EPA 560/6-82-002 and OECD 203: 1-12. Not recommended for operation in temperatures below 20°F (-7°C) or above 160°F (71°C). Recommended storage temperatures not below - 10°F (-23°C) or above 170°F (77°C). 

Low Temperature Oil
  • Provides smooth, reliable operation in the coldest climate conditions.
DescriptionGrade
(ASTM)		Specific Gravity
@ 60°F (16°C)		Color
(ASTM)		Flash PointFire PointPour PointViscosityFoam Test
(ASTM)
SUS @
100°F (38°C)		SUS @
210°F (99°C)		Viscosity Index
Standard Oil2150.882400°F
(204°C)		430°F
(221°C)		-30°F
(-34°C)		21548100 min.Pass
Flame-Out®2200.91Light Amber500°F
(260°C)		550°F
(288°C)		-15°F
(-26°C)		22055140 min.Pass
Biodegradable—0.922432°F
(224°C)		NA*-22°F
(-30°C)		18353213 min.Pass
Low Temp.—0.876.5
(Red)		356°F
(180°C)		399°F
(204°C)		-48°F
(-45°C)		18352190 min.Pass
Order No.Oil DescriptionQty.
9636Standard Oil1 qt. (57 cu. in.)
96371 gal. (231 cu. in.)
963821/2 gal. (577 cu. in.)
961655 gal.
9639Flame-Out®1 gal. (231 cu. in.)
964021/2 gal. (577 cu. in.)
9645Biodegradable1 gal. (231 cu. in.)
964621/2 gal. (577 cu. in.)
9647Low Temp.1 gal. (231 cu. in.)