IJ: 1 - 74T Inflatable Jack

  • Cylinders_Inflatable_Jack

Image 1of 1
  • IJ: 1 - 74T Inflatable Jack
PRODUCT TYPE:

Inflatable Jack

Uninflated jacks are only 1" thick making seemingly impossible lifting tasks routine.
 
Find a location near you:
SEARCH
The non-skid space-age reinforced inflatable jack is perfect for many applications.
  • Highly flexible and lightweight jacks only require an air supply of 116 psi maximum. Any non-explosive gas or water can also be used for inflation.
  • Uninflated jacks are only 1" thick, making seemingly impossible lifting tasks routine.
  • Space-age reinforced, multi-layer aramid construction, widely overlapping on all sides. Tested at 175 psi.
  • In rugged testing, jacks withstood tens of thousands of inflate/deflate cycles at 116 psi.
  • Large surface area and material flexibility allow jacks to lift loads on soft or compressible surfaces without support cribbing being necessary.
  • Safety first! The controller, shut-off and air hoses are all equipped with USA industrial interchange style air couplers. Female half coupler bodies have a locking collar, protecting operator from accidentally disconnecting jack while under load.
  • Surface of jack has a non-skid pattern, assuring that the jack won’t “walk away” from the job. Jacks can be used to lift a load from an uneven surface, are tolerant of side-loaded applications.
  • Non-conducting material resists oil, ozone and most chemicals. Cold resistant down to -40° F, heat resistant up to 240° F (short term) or 200° F (long term).
  • Field-replaceable nipples are made of tough steel, with internal thread to prevent abrasion damage. Ideal needle aperture of 1/4" allows rapid inflation, without risk of icing, and permits a safe lowering speed.
  • Single jack controller with “dead man” control (350090). Can be used individually, or in multiples to regulate any number of jacks desired.
  • Heavy attachment straps are provided on 4 largest sizes for attachment of a rope or hook to position the jack from a safe distance.
  • Inflation hose system is color-coded (red and yellow) for easy recognition when using more than one jack.


BE SAFE!
  • INSPECT BEFORE AND AFTER EACH USE.
  • REPLACE IF ANY SIGNS OF DEGRADATION OR WEAR THAT MAY AFFECT SAFETY OR PERFORMANCE.
  • KEEP THE PRODUCT CLEAN.
  • STORE PROPERLY.
Order No.Lifting
Cap.
(tons)
Lifting
Height
(in.)
Air Contents
at 116 psi
(cu. ft.)
Max. Working
Pressure
(psi)
Weight
(lbs.)
IJ 131.12 45/640.081161
IJ 453.64 45/640.51163
IJ 767.06 19/641.481164
IJ 12812.08 51/643.41168
IJ 221123.8129.511616
IJ 321334.01416.411622
IJ 441646.316 13/3225.711629
IJ 732074.620 1/251.411658

*See current price list for shipping weights.

Order No.Length
(in.)
Width
(in.)
Collapsed
Height
(in.)
IJ 135 1/25 7/641
IJ 45107 29/321
IJ 7612121
IJ 12815 45/6415 45/641
IJ 221121 45/6421 45/641
IJ 321325 39/6425 39/641
IJ 441629 1/229 1/21
IJ 732037 13/3237 13/321 13/64
*See current price list for shipping weights.
Cylinders: Inflatable Jack - Performance
Cylinders: Inflatable Jack - Typical Setup

Go to Accessories section for product detail:

Inflatable Jack Accessories:


  • Pressure reducing valve
  • Air controller for single jack
  • Shut-off house with shut-off valve
  • Air hose red
  • Air hose blue
  • Female quick couplers
  • Male quick couplers
  • Connector