Power Team - A Major Force in High Force Tools
print

power team / products and services / presses, clamps / sp: h frame open throat 25t

SP: H Frame Open Throat 25T

  • Presses_H_Frame_SPE2514

Previous imageEnlargeCloseNext image
Image 1of 1
  • SP: H Frame Open Throat 25T
PRODUCT TYPE:

H Frame

Design permits use as both H frame and C frame press.
 
Find a location near you:
SEARCH
OPEN THROAT® PRESSES
  • Cylinder can be mounted on frame extension to handle jobs which won't fit between uprights.
  • Open Throat® press models are also available with remote control to enable the operator to view work from all sides with fingertip control of cylinder piston travel.
  • Off-center pressing loads of full capacity can be applied across entire width of frame.
  • Press bed height easily adjustable with winch. Bed will not drop when handle is released.
  • Choice of power sources for rapid cylinder advance: two-speed hydraulic hand pump, electric/hydraulic or air/hydraulic. 

OPEN THROAT® Presses:
Order No.Cap.
(tons)		Type of
Cyl. Used		StrokeCylinder
Model		Speed (in./min.)†††Type PumpValve
Type		Pump Model †Prod. Wt.
(lbs.)
AdvancePressing
SPA251425Single-Acting1 41/4 "C2514C9.81.2Air2-Way FootPA6683
SPM251425Single-Acting14 1/4 "C2514C0.49 in./stroke0.03 in./strokeHandLoad-ReleaseP159693
SPE251425Single-Acting14 1/4 "C2514C46.63.3Elec.2-Way††PE172665
SPE2514S25Single-Acting14 1/4 "C2514C524Elec.3-Way†PE213S759
SPE2514DS25Double-Acting14 1/4 "RD2514524Elec.4-Way†PE214S787
† Solenoid valve with 24 volt remote control hand switch.
†† Holds pressure with motor shut off. Also has an automatic dump setting. Furnished with a 10' remote motor control.
††† Typical performance based on 100 psi and 10,000 psi pump specifications. Actual speeds may vary under operating conditions.
‡ Pump standard with press. Other Power Team pumps can be substituted. dBA at idle and 10,000 psi: PE172–67/81 dBA; PE21–70 dBA measured
at 3 foot distance, all sides.



PUMP ELECTRICAL SPECIFICATIONS

PE17 Series - 1/2 hp, 115 volt, 60 cycle, single phase.

PE21 Series - 1 hp, 115 volt, 60 cycle, single phase. Both pumps available in 230 volt, 50 cycle, add suffix "-220" to order no.
671x386_SPA2514 LA

A
(in.)

B
(in.)		C
(in.)		D *
(in.)		E
(in.)		F
(in.)		G
(in.)		H
(in.)		J
(in.)		K
(in.)		L
(in.)		M
(in.)		Floor Space
(in.)
6843283-296 7/8-43 3/84 1/2325 1/26 1/272 1/2843 x 28
*Lateral head movement

Go to Accessories section for product detail:

Shop Press Accessories: Rubber Tire Removing/Installing Set, "V" Blocks, Threaded Adapters, and Press Accessory Kit.

RELATED PRODUCTS