PMO Tank Outlet Curd Mix Proof Valves - W75CP Series

Fully independent operation and cleaning of either the upper or lower housing is achieved due to the following:

• PMO Section 15p(B) compliance for single seat lift separation while product is in the opposite housing
  
• PMO Section 12p compliance for ability to clean all product contact surfaces

Features and Benefits

• Same spray blocker technology as original W75CP to impinge CIP spray inside vent cavity
• Vessel side radial seal for minimal spillage of product when valve transitioning open or closed
• Free-draining in vertical and horizontal mount position (with tangential offset bodies)
• Accommodates standard weld-in flanges for direct vessel connection to simplify piping and reduce floor footprint
• Balanced stem design for resistance against hydraulic shock in pipeline
• Metal-to-metal seat lift adjustment stop to ensure factory setting
• Optional External Flush Adapter to clean vent cavity and drain port when full CIP not readily available
• Available in 3’’ (76mm), 4’’ (102mm), and 6’’ (152mm) OD tube sizes

Materials

• Product Wetted: ASTM 316L (UNS-S31603); (DIN-1.4404)
• Non-Product: ASTM 304 (UNS-S30400); (DIN-1.4301)
• Seat: Tri-Ring Compression Seal Upper Stem, Radial Seal Lower Stem
• Elastomers: EPDM or FKM (Fluoroelastomer)
• Finish: ≤ 32 Ra (≤0.8 μm) - Other finishes available upon request.

Operating Pressure Ratings

• 3" (76mm) O.D. Tube = 150 psig (10 bar)
• 4" (102mm) O.D. Tube = 90 psig (6 bar)
• 6" (152mm) O.D. Tube = 90 psig (6 bar)